MASTER PRICE LIST AND ORDERING DETAILS
ZTherapy Inc. Product Catalog
Click here to view our Policies Page
Prices subject to change without notice
Be sure to visit the New Products Page
Questions/Orders CALL TO ORDER
Web site: http://www.ztherapy.com
Email: sales@ztherapy.com
Tech: tech@ztherapy.com
|
Mail:
|
Core Returns: |
|
(Payments, correspondence, etc.) |
|
|
ZTherapy Inc. |
ZTherapy Inc |
|
4427 Roselawn Dr. NE Salem, OR 97305 USA |
4427 Roselawn Dr. NE Salem, OR 97305 USA |
Phone: (503) 587-9800
Fax: (503) 587-9801
Payment: Visa/ MasterCard/Amex/Discover/Money Orders/Cashiers Checks
Prices: All prices listed US currency, and do not include
shipping.
Shipping:
Domestic shipping: Items are primarily shipped by UPS ground
(with the exception of DVD's and small items, which are sent Priority Mail)
We do not sell body panels or run a junkyard. We specialize in Datsun and
British/Volvo SU Carbs only!
CALL TO ORDER WE DON'T
OFFER ON-LINE ORDERING. CALL
TO ORDER
Re-buildable cores, when requested, should accompany your order. If not, a core charge will be charged. We are sometimes out of usable cores so we may require yours in advance to process the order. Cores should be sent prepaid to us, and must be in a re-buildable state.
|
Retail price list and part numbers JAPANESE INDUCTION PLEASE NOTE: Our core policy has changed. Click
here to view |
240Z |
||
|
ZT100 |
Service SS Reman Carb 69-72 ½ 240Z 3 or 4 Screw (pair) w/ZT Roller Shafts - includes new floats **Count
the number of screws holding down the dome before calling to order.
'69-70 owners, do you have a drain plug on the float bowl? |
$950.00 + core |
|
ZT101 |
core charge for one complete pair with center linkage and springs |
$300.00 |
|
|
|
|
|
ZT150 |
Complete Tune Up Kit for 2 Z carbs
(pair
needle & seats,
pair SM,
N27, or N58 needles, pair new ZT Nozzles, 2 float gaskets, 2 fuel lines, 4
fuel line clamps, 4 banjo washers, 4 insulator gaskets, Just SU's
DVD) |
$290.00 |
|
ZT154 |
ZTherapy nozzles
- new (pair) 098, 099,
.100, .101, .102, .103, .104, .105
(Over 6,000 ft? Buy one size smaller orifice from stock-- .099 works!) |
$120.00 |
|
|
|
|
|
ZT110 |
Reman Carb Body 69-72 ½ 240Z 3 or 4 Screw w/ZT Roller Shafts (pair) |
$490.00 + core |
|
ZT111 |
core charge for one pair of carb bodies (with old butterflies) (pair) |
$200.00 |
|
|
|
|
|
ZT123 |
Smooth and clean 240Z Intake/Balance
Tube,
polished and plated--no smog, no control valves, no vac taps. Water heating still works, if desired.
Crankcase breather and Valve cover breather fittings intact. Includes
firewall linkage, carb mounting nuts, washers, lock
washers. Cleaned up insulator with new gaskets. Your choice of
intakes (240Z water, 240Z no water, 260Z, with a 240Z balance tube.
Extraneous holes are plugged. Basically all the junk on the balance
tube is deleted (Smog equipment available at additional cost) |
$175.00 + core |
|
ZT124 |
core
charge
for ZT123 intake
(your dirty one must be complete-just like the one we
sent you in advance!) |
$150.00 |
|
Intake halves without the water
pipes available upon request. The water HEATS the intake charge.
Good in the |
||
| ZT125 | Smooth & clean 240Z Balance Tube only, polished & plated - no smog, no control valves, no vac taps. Extraneous holes are plugged. Basically all the junk on the balance tube is deleted. | $85.00 + core |
| ZT126 | core charge for ZT125 | $75.00 |
| ZT128 | Euro-Style Balance Tube Polished and Plated, All extra holes are Welded Shut, Ground down smooth and polished | $225.00 + core |
|
|
Core charge for ZT128 |
$75.00 |
| ZT119 | Intake manifold only - polished & plated | $85.00 + core |
|
|
|
|
|
|
Tools |
|
|
ZT158 |
Tool, Jet centering for 4 Screw Z and 2000 Roadster, HS6, HS4piston fitted with tool steel rod where the needle should be. Steel rod is same diameter as jet nozzle. Loosen nozzle tube jamb nut, insert tool, tighten jamb nut. |
$60.00 |
|
ZT159 |
Tool, Float level sight glass for all Zflexible clear fuel line attached to drain plug bung. Internal wire formed. Read fuel level while tuning to see height in the float chamber. Great for racers looking for that last possible horsepower. |
$40.00 |
|
ZT160 |
Tool, Flowmeter, "Unisyn". Rising ball style, adjustable for high and low RPM balancing. This tool is essential for tuning sidedrafts. Very easy to use. As shown in the "Just SU's" video |
$50.00 |
|
ZT999 |
Core credit-send in extra complete pairs of carbs for $200 toward purchase of complete Carbs only! (ZT100, ZT500 etc.) (subject to need) |
|
|
260Z Owners (July '72+) |
||
|
ZT161 |
260Z Conversion Kit--keeping the 260Z EGR Balance
Tube. Includes 2 240Z 3 screw carbs, center linkage, throttle return springs, new floats. Includes core fee |
$1,158.00 |
|
ZT162 |
260Z Conversion Kit--No EGR--Clean 240Z Balance
Tube.
Includes 2 240Z 3 screw carbs, center linkage, throttle return springs, new floats. Includes 240 Z Balance tube. Includes firewall linkage, carb mounting nuts, washers, lockwashers. Cleaned up insulator with new gaskets. Crankcase breather and Valve cover breather fittings intact. Extraneous holes are plugged. Basically all the junk on the balance tube is deleted. includes core fee. This is what you buy if you have a 7/72+ with the crappy carbs and want a 240Z setup |
$1,505.00 |
|
ZT122 |
240Z Balance Tube for 260Z conversion
(includes core fee) for7/72+ 260Z owners wishing to delete the EGR valve and
all the garbage on the intake. Includes linkage to firewall.
Cleans up the intake to match the 240Z. Crankcase breather,
valve cover breather, brake booster tap fittings intact. Air
pump may be retained. Stock air cleaner may be retained. Basically all
the junk on the balance tube is deleted Includes core fee which
will not be refunded |
$290.00 |
|
ZT132 |
Adapter plates, 260Z air cleaner to 240Z carbs CNC milled, all studs, nyloc nuts, countersunk metric bolts, tool. For street driving only. Hot Z cars must also buy ROUND air horns to install in 260Z air cleaner. |
$65.00 |
|
|
|
|
| ZTSM | SM Needles (pair) | $50.00 |
| ZT20 | Fuel Line | $12.00 each |
| ZT25 | Throttle return springs | $10.00 each |
| ZT25-665 | Needle & seat (pair) | $50.00 |
| ZT30 | Float - Z | $50.00 each |
|
Gaskets |
||
| ZT095 | Carb to air cleaner gaskets, Z/2L | $6.00 each |
|
ZT096 |
Gaskets
–
2 bolt for the 1600 / SSS / British SU |
$4.00 each |
|
ZT097 |
Float Bowl Gaskets |
$4.00 each |
|
ZT098 |
Gaskets - 3 Screw water/manifold, Carb to Intake |
$4.00 each |
|
ZT099 |
Gaskets, for the Z/2L/BritSU. Non/water, 4 screw |
4 for $16.00 |
3 Screw 240Z Carbs were
installed by the dealer on some 260Z's if the customer complained enough about
the poor performance, vapor lock problem, and general miserable driving
behaviors We sell 3 screw 240Z
carbs to 260Z
owners!.
240Z pilots-Look at how many screws
are holding down the dome. This is how we tell what carb
you have.
69-70 Z collectors-do you have
drain plugs on your float chambers directly above the fuel outlet? We
have
these rare carbs in stock!
|
2000 Roadster |
||
|
ZT500 |
DATSUN 2000 ROADSTER Service SS Reman Carb (pair) ZT Roller Shafts Includes new floats |
$950.00 + core |
|
ZT501 |
core charge for one pair of carbs
Must return 2litre 1 3/4" carbs, not something else! |
$300.00 |
|
|
|
|
|
ZT510 |
2000 ROADSTER Reman Carb Body W/
ZTRoller Shafts (pair) |
$490.00 + core |
|
ZT511 |
core charge for one pair of carb bodies (with old butterflies) |
$200.00 |
|
|
|
|
|
ZT520 |
Intake, polished and plated complete |
$165.00 + core |
|
ZT521 |
core charge for intake |
$75.00 |
|
|
|
|
|
ZT554 |
ZTherapy nozzles - new (pair) 6,000 ft altitude drivers-you must run .099 ZT nozzles for max power Note: if you require 90 degree nozzles ('67 2000), these are rebuilt and cores are required. Please send in your old nozzles or pay $100 core charge in addition to price. |
$120.00 |
|
ZT558 |
Master TuneUp kit includes: 2 nozzles w/fuel line, 4 fuel line clamps, 4 banjo washers, 2 new RA or N25 needles, 2 new needle & seats (float valves), 2 new float gaskets, "Just SU's" DVD, insulator gaskets (4) Note: if you require 90 degree nozzles ('67 2000), these are rebuilt and cores are required. Please send in your old nozzles or pay $100 core charge in addition to the price. |
$290.00 |
|
ZT725-665 |
Needle & seat (pair) |
$50.00 |
| ZT31-608 | Needle & seat (pair) (If you have free-floating floats) | $50.00 |
| ZT30 | Float - pivot float $50 each ZT16 Free-floating float ('70) $65 each | |
|
ZT999 |
Core credit-send in extra complete pairs of carbs for $200 toward purchase of complete Carbs only! (Limit 3) (ZT100, ZT500 etc.) (subject to need) |
|
Look at your float chamber-does the fuel exit out the center of the bottom, or out the lower front?
Racers--our shafts are normally
undersized. If you race ITS or EP, ask for "Blue Shafts" (RollerShafts
that are standard diameter, and SCCA legal)
DATSUN 1600 |
||
|
ZT700 |
DATSUN 1600/410/411 Service SS Reman Carb (pair) ZT RollerShafts - Includes new floats |
$950.00 +core |
|
ZT701 |
core charge for one pair of carbs (pair) |
$300.00 |
|
ZT710 |
DATSUN 1600 Reman Carb Body w/shafts (pair) ZT RollerShafts |
$490.00 + core |
|
ZT711 |
core charge for one pair of carb bodies (with old butterflies) (pair) |
$200.00 |
|
ZT720 |
Intake, polished and plated complete |
$165.00 + core |
|
ZT721 |
core charge for intake |
$75.00 |
|
ZT754 |
ZTherapy nozzles - 180 degree (late 1600) - new (pair) 90
degree nozzles (early 1600) are rebuilt and cores are required. Please send in
your old nozzles or pay $100 core charge in addition to the price.
|
$120.00 |
|
|
Needle & seat (pair) |
$50.00 |
|
ZT758 |
Master TuneUp kit
includes: 2 nozzles w/fuel line, 4 fuel line clamps, 4 banjo washers, new M39 needles, new needle & seats (float valves), 2 new float gaskets, "Just SU's" DVD, insulator gaskets (4) Note: if you require 90 degree nozzles (early 1600), these are rebuilt and cores are required. Please send in your old nozzles or pay $100 charge in addition to the price. |
$290.00 |
| ZT16 | Composite float |
$65 each |
Look at your float chamber-does the fuel exit out the bottom, or out the front?
DATSUN 510 SSS |
||
|
ZT800 |
DATSUN 510 SSS Service SS Reman Carb (pair) ZT RollerShafts - Includes new floats |
$950.00 +core |
|
ZT801 |
core charge for one pair of carbs (pair) |
$300.00 |
|
ZT810 |
DATSUN 510 SSS Reman Carb Body w/shafts (pair) ZT RollerShafts |
$490.00 + core |
|
ZT811 |
core charge for one pair of carb bodies (with old butterflies) (pair) |
$200.00 |
|
ZT820 |
Intake, polished and plated complete |
$165.00 + core |
|
ZT821 |
core charge for intake |
$75.00 |
|
ZT830 |
2 bolt heatshield for 38mm carbs - new |
$95.00 |
|
|
4 bolt heatshield for 46mm carbs - new |
$95.00 |
|
ZT854 |
ZTherapy nozzles - new (pair) |
$120.00 |
| ZT31-608 | Needle & seat (pair) | $50.00 |
| ZT858 |
Master TuneUp kit
includes: 2 new nozzles w/fuel line, 4 fuel line clamps, 4 banjo washers, new M39, M43, or M66 needles, 2 new needle & seats ( float valves), 2 new float gaskets, "Just SU's" DVD, insulator gaskets (4) |
$290.00 |
| ZT999 | Core credit-send in extra complete pairs of carbs for $200 toward purchase of complete Carbs only! (Limit 3) (ZT100, ZT500 etc.) (subject to need) | |
| ZT16 | Composite float | $65 each |
|
510 SSS and 1600 - Feel you need more carb for your 2L or bigger 4 cylinder L motor?-We offer 46mm carbs for your L motor, with custom built linkage for the 4 cyl.- $950 plus core carbs |
Racers--our shafts are normally undersized. If you race ITS or EP, ask
for "Blue Shafts"
(Roller Shafts that are standard diameter, and SCCA
legal)
HS6 and HS4 British/Swedish
Induction
|
||
|
ZT1400 |
Volvo HS6 3 or 2 bolt Remanufactured
Carbs
(pair) ZTRollerShafts |
$950.00 +core |
|
ZT1401 |
core charge for one pair of carbs |
$300.00 |
|
|
|
|
|
ZT1410 |
Volvo 3 or 2
bolt Reman Carb
Body w/shafts
(pair) ZTRoller Shafts |
$490.00 + core |
|
ZT1411 |
core charge for one pair of carb bodies (with old butterflies) |
$200.00 |
|
|
|
|
|
ZT1420 |
Intake
polished and plated complete |
$165.00 + core |
|
ZT1421 |
core charge for intake |
$75.00 |
|
|
|
|
|
ZT1454 |
ZTherapy nozzles (pair) |
$120.00 |
|
ZT1458 |
Master TuneUp kit includes: 2 nozzles w/fuel line, new needles, needle & seats (OR new viton-tipped float valves), new float gaskets, "Just SU's" DVD. Piston push pin seals (2). |
$290.00 |
|
|
Note: 1600 cc engines used a 1 3/4" mouth HS6, and a 5 1/2" long piston spring with the KD needle. If you bored your 1.6 out to 2.0 litres, you should be using a 2L setup. This kit is the shorter 4" 2.0L spring and SM needles. Try stock, then switch to this. Send back what you don't need for a refund within 45 days. Only offered to customers buying new carbs from us. |
|
Before you call to order new carbs I need to know two things: 1. How many bolts hold your air cleaner to the carb (2 or 3 per carb). 2. Do you have a vacuum advance distributor?
If you are ordering a Volvo intake, does it have the BCDD
device? That's a thing that screws
into the intake above the carbs in the center.
We are collecting 2" Jag carbs. Please send them in for $200.00 each cash/credit towards ZT product.
We are NOT collecting HS6 cores at this time.
As we collect HS2-HS8 cores, we will enter these markets and offer highly
polished high performance units with
RollerShafts
|
AUD 9149 |
Jet nozzle,
left
under/oversized
hole avail by special order .099-.1045 inch |
$60.00 |
|
AUD 9148 |
Jet nozzle,
right stock hole size
is .100 inch |
$60.00 |
|
|
|
|
AUD ZTSM
|
SM needle 2 litre British,
hot rod 240Z-280ZX |
$25.00 ea. |
AUDZTKD
|
KD needle 1600 HS6 |
$25.00 ea. |
AUC 8459
|
Float chamber gasket HS6 |
$6.00 |
|
JCX 1395 |
Float chamber screws (all British) |
$3.00 |
|
AUC 1152 |
Float pivot |
$3.00 |
|
WZX 1300 |
Float, new style, no metal
tab.
Call
for old style metal adjustables |
$60.00 |
|
AUC 1324 |
Throttle shaft nuts, genuine British Whitworth
thread (Specify yellow or silver
plate) |
$6.00 |
|
AUD 9585 |
Needle & seats, per pair |
$50.00 |
|
AUC 4943 |
Seal, piston push pin |
$4.00 |
|
AUC 4944 |
Washer, piston push pin |
$3.00 |
|
AUC
1206 |
Lockwasher for nut on
throttle shaft (bendable ears to hold nut tight) |
$3.00 |
|
ZT 160 |
Unisyn Flowmeter |
$50.00 |
| British / Swedish Carb To Manifold Gasket | $6.00 | |
|
|
||
